Syncing Two Bases - Ergomotion 3160 Serie Manual Del Propietário

syncing two wireless bases (optional)
The Sync Cord connects the two control boxes to a single remote for the synchronization of two bases.
STEP 1
Unplug bases from power source.
STEP 2
Locate the Multifunction Port on each control box.
STEP 3
Connect the male end of each Sync Cord to the multifunction
port on each control box.
STEP 4
Plug bases back into the power source.
STEP 5
Check to ensure all cords are securely attached. Both remotes
will now operate both bases simultaneously.
14
A Sync Cord is included with Twin Long and CA King Split bases.
The system is now linked. Buttons pressed on either remote
will control both bases simultaneously.
Control Box 1
PERFORMANCE NOTES
If bases become mismatched, pressing the FLAT button will re-
sync the mechanical positions.
Sync Cord
Control Box 2