Headboard Brackets - Ergomotion 3160 Serie Manual Del Propietário

headboard bracket installation guide (optional)
A 9/16" (14 mm) & 1/2" (13 mm) socket and crescent wrench are necessary to complete installation.
STEP 1
a.) Align the bracket and to the holes in the frame with the tabs
facing outward. Loosely secure the bracket to the leg post
with two bolts, nuts and washers.
b.) Loosely secure the bracket to the frame with one bolt, nut
and washer. The bracket can be moved forward or backward
to adjust spacing between the head of the base and the
headboard.
a
Once the bracket has been spaced to accommodate the
headboard, secure and tighten the bolts, nuts and washers.
Headboard Brackets are an optional accessory.
b
a
b
STEP 2
Attach the plastic spacer and T-Bracket.
a.) Measure the distance between the mounting holes on the
headboard and install the spacer and attachment plate to
accommodate the headboard.
b.) To install the plastic spacer and attachment plate, you
will need (2) long bolts and (2) nuts. Place the spacer and
attachment plate in the desired location and slip the bolts
through the holes with the head of the bolt facing outward.
Position the bolts diagonally on the spacer. Use the 9/16" (14
mm) socket and wrench to tighten the bolts.
STEP 3
You may now connect your headboard to the attachment plates
using the remaining short bolts and nuts to secure it to the
brackets. The heads of the bolts will face outward. Use a 9/16"
(14 mm) socket and 1/2" (13 mm) wrench to tighten the bolts.
17