connecting strap (optional)
If a split setup is being installed, plastic connecting straps are provided with
STEP 1
With the bases in their desired location, slightly loosen both legs
to allow the strap to fit on the leg bolt, between the leg washer
and frame.
16
Twin Long and CA King Split bases.
Use of the connecting straps is optional and is not required.
STEP 2
Slide side (a) of the connecting strap onto leg bolt. Swing the
strap and connect side (b) to the leg bolt. Secure the strap by
shifting to the left.
STEP 3
Re-tighten legs. Do not over tighten. Use the remaining strap
and repeat on other end of the base.
a
b