Ergomotion 3160 Serie Manual Del Propietário página 13

installation guide
STEP 6
Uncoil the Power Cord and connect to the
Power Supply. Place Power Supply on the
ground and extend from the base. Ensure
that the Power Supply and all attached
cords are directed toward the desired
surge protector.
STEP 7
Carefully flip the base over onto its legs.
Important: Always use two people when setting up, moving or
flipping the base. Do not drag across the floor. Do not rest frame on
its side, excessive pressure may damage the legs.
STEP 8
Plug the base into a power source. A surge protector is
strongly recommended.
WARNING
Always unplug the base from the electrical outlet before servicing any
part of the base. To reduce risk of electric shock, unplug the base before
cleaning. To safely disconnect, ensure the base is in a flat position with
all motors off, and unplug from power source.
For customer support, visit www.ergomotion.com or call: 888-550-3746
STEP 9
Ensure batteries are correctly installed in the back of the
remote.
Quickly test functions to verify proper setup before placing
mattress on base. Press FLAT to return the base to a flat
position.
STEP 10
Slide the left side of the mattress retainer bar into the bracket.
Pull the retainer bar to the opposite bracket and secure the
right side.
Setup is now complete! Test all functions on remote.
11