Assembling Rs846 - Rs847 - Mopedia RS844 Manual De Instrucciones

6
8.2 Assembling RS846 – RS847
To complete the assembly carry out the following operations:
• Insert the fixing tubes on the left or right side frame, align the holes and insert the C-clips
as shown in Fig.9;
• Connect the newly assembled part to the other side of the frame by using the same two
fixing tubes and two additional C-clips as described in the previous point (Fig.10);
• Insert the backrest inside the holes on the wheelchair frame and fix the backrest using the
two fixing knobs (Fig.11);
Fig.9
Images are illustrative purposes only
• Place the seat on the wheelchair frame and press down to fix its position, then add the
cover (Fig.12);
• Insert the footrests from the side and rotate them to the front until fastening into the holder (Fig.13);
• Insert the bucket from the rear side of the shower and WC chair by sliding it into the slots
(Fig.14).
Fig.12
Images are illustrative purposes only
Fig.10
Fig.13
Fig.11
Fig.14