I/O Pcb Check - NAMCO GUN SURVIVOR 2 Manual Del Operador

6-2-4-1 I/O PCB Check

1. Select "I /O PCB CHECK" on the I/O TEST menu screen. The following
screen is displayed.
If the I/O board is not connected, [CONNECT NG] is displayed
*
2. Select "EXIT" and press the Enter button to return to the I/O TEST menu
screen.
I/O PCB : Connect OK
namco ltd. ; FCA-1 ;Ver1 . 01 ; JPN ,
2Coins 2Guns
EXIT
SELECT SW : CHOOSE
I/O TEST
LINK : ON 1
ENTER SW : ENTER
Page 46