Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
RIDGE RACER V
OPERATORS MANUAL
I
T IS THE RESPONSIBILITY OF THE OPERATOR TO MAINTAIN CUSTOMER SAFETY
,
AT ALL TIMES
AND IT IS IMPERATIVE THAT THE DETAILS SET OUT IN THIS MANUAL
ARE FOLLOWED PRECISELY
Issue 1
Part No. 90500117
Publicidad
Manuales relacionados para NAMCO RIDGE RACER V
Resumen de contenidos para NAMCO RIDGE RACER V
- Página 1 RIDGE RACER V OPERATORS MANUAL T IS THE RESPONSIBILITY OF THE OPERATOR TO MAINTAIN CUSTOMER SAFETY AT ALL TIMES AND IT IS IMPERATIVE THAT THE DETAILS SET OUT IN THIS MANUAL ARE FOLLOWED PRECISELY Issue 1 Part No. 90500117...
- Página 2 Contents ΕΞΕΤΑΣΗ ΓΕΝΙΚΗΣ ΑΣΦΑΛΕΙΑΣ ......................Page 2...
- Página 3 Page 3...
- Página 4 Page 4...
- Página 5 Do not make any alteration to this equipment without prior approval. Doing so could cause unforeseeable danger. Only parts specified by Namco Europe Ltd. should be used when replacing parts. (Including screws) Ensure that the power to the equipment is turned OFF before commencing any maintenance work.
- Página 6 Page 6...
- Página 7 2m 20cm or more 30cm or more 30cm or more Play zone Pathway Page 7...
- Página 8 Page 8...
- Página 9 2m 20cm or more 30cm or more 30cm or more Play zone Pathway Page 9...
- Página 10 Page 10...
- Página 11 2m 20cm or more 30cm or more 30cm or more Play zone Pathway Page 11...
- Página 12 Page 12...
- Página 13 2m 20cm or more 30cm or more 30cm or more Play zone Pathway Page 13...
-
Página 14: Ο∆Ηγιεσ Ασφαλειασ
Καθώς αυτές οι πληροφορίες σε αυτ το εγχειρίδιο έχουν δοθεί µε καλή πίστη και ακριβώς την ώρα της τύπωσης , η εταιρεία NAMCO EUROPE LIMITED κρατάει το δικαίωµα να κάνει οποιεσδήποτε αλλαγές χωρίς ειδοποίηση. Τα µηχανήµατα έχουν κατασκευαστεί σύµφωνα µε τους ρους της Ευρωπαϊκής Κοιν τητας , και έχουν ελεγχθεί σύµφωνα µε τους ν µους... - Página 15 ΣΗΜΕΙΩΣΕΙΣ ΓΙΑ ΤΗΝ ΕΓΚΑΤΑΣΤΑΣΗ 2m 20cm or more 30cm or more 30cm or more ΠΟΤΕ να µην αν βει το µηχ νηµα ε ν δεν χει ολοκληρωθε η εγκατ σταση. Play zone Για την αποφυγ ηλεκτρικ ν σοκ πρ πει το µηχ νηµα να χει γειωθε . Για...
- Página 16 Page 16...
- Página 17 2m 20cm or more 30cm or more 30cm or more Play zone Pathway Il gioco è fornito di ruote per rendere più facile il suo spostamento. Fare attenzione quando si muove la macchina su una superficie inclinata. La testata ha il baricentro spostato in avanti, è perciò importante che ci siano almeno 2 persone per montare o smontare la testata stessa.
- Página 18 Page 18...
- Página 19 2m 20cm or more 30cm or more 30cm or more Play zone Pathway Page 19...
- Página 20 Page 20...
- Página 21 2m 20cm or more 30cm or more 30cm or more Play zone Pathway Page 21...
- Página 22 Page 22...
- Página 23 2m 20cm or more 30cm or more 30cm or more Play zone Pathway Page 23...
- Página 24 Page 24...
- Página 25 2m 20cm or more 30cm or more 30cm or more Play zone Pathway Page 25...
- Página 26 Page 26...
- Página 27 2m 20cm or more 30cm or more 30cm or more Play zone Pathway Page 27...
- Página 28 1. SPECIFICATIONS 230v /350watts AC +5°C to +25°C Hantarex 28” Polo-Medium Planar (Type 02193240) Mars CashFlow - 4 Channel Dispense Assembled 1600(w) x 870(d) x 1990(h) Monitor Cabinet 1600(w) x 870(d) x 1590(h) Seat Assembly 452(w) 820(d) x 1220(h) Header Assembly 1470(w) x 370(d) x 450(h)
- Página 29 2. HOW TO PLAY [Game Overview] • • • [To Start a Game] • • • • • •...
-
Página 30: Major Components
3. MAJOR COMPONENTS Fluorescent lamp Header Assy Game PCB Assy Mains-In and ON / OFF switch Game PCB Assy Monitor Control panel Assy Control panel Assy Steering Assy Brake pedal Assy Accelerator pedal Assy Seat Assy Coin Assy Seat Assy... -
Página 31: Moving The Machine
4. MOVING THE MACHINE 5. INSTALLATION... - Página 33 ΤΟ ΜΗΧΑΝΗΜΑ ΕΙΝΑΙ ΣΧΕ∆ΙΑΣΜΕΝΟ ΓΙΑ ΧΡΗΣΗ ΣΕ ΕΣΩΤΕΡΙΚΟ ΧΩΡΟ ΜΟΝΟ ΜΗΝ ΤΟΠΟΘΕΤΗΣΕΤΕ ΤΟ ΜΗΧΑΝΗΜΑ ΣΤΟΥΣ ΑΚΟΛΟΥΘΟΥΣ ΧΩΡΟΥΣ Εξωτερικά Απευθείας στον ήλιο,σε µέρη που υπάρχει υγρασία ή σκ νη,µέρη που υπάρχει άφθονο νερ ,κοντά σε air-condition ή άλλου είδους θέρµανση,µέρη µε υπερβολική υψηλή...
- Página 35 Security screw (M5 x 12) Header Acrylic Retaining Bracket Pozi head screw (with flat/spring washers) (M6 x 16) Header Assy Header Acrylic Pozi head screw (with flat/spring washers) (M6 x 16) Header Assy...
- Página 36 Pozi head screw (with flat/spring washers) (M6 x 16) Header Assy...
- Página 37 Security screw (M5 x 12) Cabinet Assy Floor plate (R) Adjustable Feet Hex head screw (M8 x 25) with Flat/Sring washer Connector Seat Assy Adjustable Feet...
- Página 38 Note: If the location site of this machine has a polished floor it is recommended that rubber pads are fitted under the level adjusters to prevent the machine sliding on the floor when in use. Castor Approx. 5mm Level adjuster (See Section 6-3-3 page 47 to set the game PCB ID correctly) Number sticker Number sticker...
- Página 39 • • • Game PCB Assy Slot Security Card...
- Página 40 • • • CD-ROM drive Game PCB Assy EJECT button Game PCB Assy CD-ROM Tray...
- Página 41 6. ADJUSTMENTS Μετατροπές ή επιδιορθώσεις στα µηχανήµατα πρέπει να γίνονται µ νο απ εξουσιοδοτηµένα άτοµα.
- Página 42 COIN COUNTER 2 Amp Q/B (Coin Fuse) PLAYER 1 PLAYER 2 SELECT SELECT DOWN DOWN ENTER ENTER TEST SERVICE SERVICE TEST...
-
Página 43: Test Mode
6-3 Test Mode Open the coin door and slide the test switch “ON”. The “Menu Screen” will be displayed on the monitor. Select the test required by using the select up/down switch. The colour of the selected test will change. Activate the test by pressing the Enter switch. - Página 44 Note:- The price of play on this machine is set within the Cashflow Coin Mech. Ensure that the Game Cost is set to 1 Coin 1 Credit. COIN OPTIONS [DEFAULT IN GREEN] GAME COST 1COIN (S) 1 CREDIT CONTINUE COST 1 COIN (S) 1 CREDIT GP WINNER SERVICE (SOLO) GP WINNER SERVICE (LINK)
- Página 45 6-3-2 Game Options GAME OPTIONS [1 OF 2] [DEFAULT IN GREEN] LINK LINK AS 1 (LEFT) PCB ID 1 (LEFT) ENTRY WAIT SELECT SPEED B (MEDIUM) COURSE CHOICE ONCE SPEED DISPLAY RECORD INITIALIZE RACE SETTINGS EXIT SELECT SW : CHOOSE ENTER SW : ENTER GAME OPTIONS [2 OF 2] [DEFAULT IN GREEN]...
- Página 46 s t i a l i , ) t z i l ) f ( z i l z i l z i l z i l c i f y t l t i t ) i ( n i l ) j ( y l l c i f...
- Página 47 I / O TEST DIP SW 1234 [ON : RED] LINK LINK AS 1 (LEFT) I /O PCB CHECK GO TO [I /F] INITIALIZE SWITCH TEST LAMP TEST EXIT SELECT SW : CHOOSE ENTER SW : ENTER (see 6-3-3-1 page 48) (see Section 7 page 55) (See 6-3-3-3 page 49)
- Página 48 DIP SW 1234 [ON : RED] LINK LINK AS 1 (LEFT) I / O PCB CHECK namco ltd: FCA-1: ver 1.00: EXP Multipurpose + Rotary Encoder I/O PCB CONNECT OK NAMCO LTD. EXIT SELECT SW : CHOOSE ENTER SW : ENTER...
- Página 49 6-3-3-3 Switch Test I / O TEST DIP SW 1234 [ON : RED] LINK LINK AS 1 (LEFT) SWITCH TEST COIN SERVICE TEST UP SELECT DOWN SELECT ENTER STEERING +000 RIGHT OK 000 OK BRAKE 000 OK DOWN SHIFT UP SHIFT VIEW CHANGE EXIT SELECT SW : CHOOSE...
- Página 50 I / O TEST DIP SW 1234 [ON : RED] LINK LINK AS 1 (LEFT) LAMP TEST VIEW CHANGE EXIT SELECT SW : CHOOSE ENTER SW : ENTER...
-
Página 51: Monitor Test
6-3-4 Monitor Test MONITOR TEST GRADATION PATTERN CROSSHATCH PATTERN (CRT) CROSSHATCH PATTERN (PROJECTOR) WHITE WINDOW (H) WHITE WINDOW (M) WHITE WINDOW (L) INTERLACE PATTERN VIEW ANGLE ADJUST (CRT) VIEW ANGLE ADJUST (PROJECTOR) FULL WHITE EXIT SELECT SW : CHOOSE ENTER SW : ENTER... - Página 52 I / O TEST VOLUME ALL SP (0~15) ATTRACT (0~15) REQUEST SONG No. MESSAGE : EXIT SERVICE SW : REQUEST SELECT SW : CHOOSE ENTER SW : ENTER...
- Página 53 CD TEST TYPE INITIALIZE CHECK READ CHECK SEEK CHECK STANDBY CHECK PAUSE CHECK STOP CD MEDIA CHECK EXIT SELECT SW : CHOOSE ENTER SW : ENTER...
- Página 54 OTHERS ROM Ver. 00/11/00 19:10:15 CD-ROM Ver. 00/11/13 14:23:36 CLOCK 00/12/05 10:20:42 LANGUAGE ENGLISH BACKUP MEMORY INITIALIZE EXIT SELECT SW : CHOOSE ENTER SW : ENTER...
- Página 55 7. INITIALIZATION I / F INITIALIZE STEERING +000 BRAKE GO TO [SWITCH TEST] : ENTER SW EXIT : DOWN TEST SW...
- Página 56 8. MAINTENANCE Μετατροπές ή επιδιορθώσεις στα µηχανήµατα πρέπει να γίνονται µ νο απ εξουσιοδοτηµένα άτοµα. Να είναι σίγουρα κλειστ το ρεύµα πριν οποιαδήποτε δουλειά στο µηχάνηµα.
-
Página 58: Error Messages
8-1 Error Messages See below for Error Message details. " . y t " 0 - f l . y t . y t " . y t " 2 - f l . y t . ) t " "... - Página 59 Disconnect these connectors...
- Página 60 CD-ROM drive Connectors Hook Pozi head screw (M4x10) (with flat/spring washer) Pozi head screw(M3x6) (with flat/spring washer CD-ROM bracket CD-ROM drive Note: When shipping the CD Drive, ensure that it is wrapped in sponge or bubble-wrap and packed in a strong carton to prevent damage.
- Página 61 2P side (The 1P fuse is on the other side of the panel.) Fuse Steering PC board Countersunk nut (M6) Connector PCB base (+)Phillips pan head screw (with flat/spring washer) (M3 x 12) Note: When refitting the PC Base ensure that the tab at the bottom of the PC Base engages in the slot in the cabinet.
- Página 62 Amplifier PC board Locking support Pliers < To remove > Connector PC board Click! < To reinstall >...
- Página 63 Button head screw (M5 x 12) Top Retaining Bracket Header Acrylic Starter Fluorescent lamp...
- Página 64 Security screw (M6 x 16) Gear Shift Assy Connector...
- Página 65 Pozi head screw (M3x16) Microswitch...
- Página 66 Security screw (M5 x 20) Control panel Assy Security screw (M5 x 20) Control panel Assy Connector...
- Página 67 8-8 Replacing the View Change/Credit Available Switches View change switch Control panel Assy View change switch Yellow White White/Black White/ Purple Connect the wires properly to prevent malfunction. Lamp holder Lamp (wedge lamp, 14V, 3.8W)
- Página 68 8-9 Replacing the Steeering Assembly Remove the Play Panel Assy. (see 8-7 page 66) Disconnect the Steering Motor and Steering Potentiometer connectors. Remove 4off hex head screws (M8x25) and remove the Steering assembly. Hex head screw (M8x25) Hex head screw (M8x25) Reassemble in reverse order Page 68...
- Página 69 Hex socket head screw (M4x10) Grub screw (M4x10) Mounting bracket Potentiometer Note: When refitting the potentiometer ensure that the grub screw engages on the flat of the potentiometer shaft.
- Página 70 Belt Hex head screw (Mx60) Hex nut (M5) Note: Do not over tension the drive belt.
- Página 71 Steering wheel Centre cap Countersunk socket head screw (M3x16) Countersunk socket head screw (M6x26) Note: When replacing the steering wheel ensure that the steering wheel shaft is in the centre position and the wheel is fitted with central spoke pointing downwards.
- Página 72 Accelerator pedal assy Brake pedal Assy Connectors Pedal plate Button head screw (M5 x 12)
- Página 73 Accelerator pedal Assy Hexagonal wrench Hex socket screw (M4 x 8) Ground lead Brake pedal Assy Whizztite Nut Connector Cable clip Connector Potentiometer bracket Brake pedal Accelerator pedal Assy Assy Hexagonal nut Potentiometer Potentiometer 1 2 3 1 2 3 Spring washer Flat washer...
- Página 74 8-15 Replacing the Brake Damper Remove the pedal assemble. (see 8-13 page 72) Remove 4off flange socket head screws (M6x8) and remove the brake damper assy. Flange socket (M6 x 8) Flange socket (M6 x 8) Brake damper Replace the damper assy and reassemble in reverse order. Note: After replacing the damper ensure that the game is re-initialized.
- Página 75 Hexagonal bolt (M6 x 60) Countersunk washer nut Cushion and spacer Cross section Spacer Cushion...
- Página 76 Earth Connection Pozi head screw (M4x8)
- Página 77 Security screw (M5 x 20) Monitor face CTR Security screw (M5 x 20) Monitor face UPR Security screw (M5 x 20) Monitor mask Security screw (M5 x 20) Monitor face L Security screw (M5 x 20) Monitor face R...
- Página 78 Top bracket Pozi head screw (M5 x 12) Pozi head screw (M5 x 12) Mask bracket...
- Página 79 Monitor Washer (M8) Washer (M8) Pozi head screw (M8x20) (with flat/spring washer) Monitor...
- Página 80 9. PARTS 9-1 Monitor Cabinet Opposite side Opposite side Opposite side Cross section B-B Cross section C-C Page 80...
- Página 81 " 8 a l l a l l e l l ½ "...
- Página 82 9-2 Header Assy Opposite side c i l c i l t t i...
- Página 83 9-3 Mains-In Assy and Service Bracket d i l c t i c t i c t i t l i...
- Página 84 a l i a l i...
- Página 86 t f i...
- Página 87 9-7 Accelerator Pedal Assy Cross section A-A...
- Página 88 Cross section A-A...
- Página 89 9-9 Game PCB Assy ½ " Page 89...
- Página 90 d i l ½ "...
- Página 91 HEADER Assy AMP UNIV 3w AMP UNIV 3w AMP EI 3w AMP EI 3w White / Blue White / Blue BROWN FLUORESCENT Assy STEERING White / Red White / Red STEERING GRN/YEL STEERING STEERING V257 STR PCB BLUE V257 Ass (L) STR PCB White / Black White / Black...
- Página 92 Copies of Namco Game Manuals can be downloaded from our website: www.namco.co.uk/html/spares/index.htm For all Parts or Technical Support contact: Brent Spares, Namco House, Units 5-8, Acton Park Estate, The Vale, London. W3 7QE www.namco.co.uk For Technical Support, Warranty and Advance Replacement Parts:-...