Tabla de contenido
Publicidad
INSTRUCTIONS FOR USE
SAFETY INSTRUCTIONS
1. Please keep this instruction sheet safely for future reference.
2. Please do not modify the product or the assembly details in any way. Modifi cations will affect the structural integrity
and replacement parts will be at the buyer's expense. Inappropriate use or faulty application of the product are explic-
itly forbidden and absolve the manufacturer of all liability. This product needs to be mounted by an adult before use.
3. The use of the item is allowed only under continuous supervision by an adult. The product is only intended for use as
a zip wire between two points, for 1 user older than 6 years and with a maximum weight of up to 80 kg.
4. This product meets all security aspects of the European standard EN71-1, EN71-2, EN71-3 and EN 71-8. It is only suit-
able for family domestic use, both indoors and outdoors.
5. The zip wire should only be used after it has been properly installed according to the following guidelines.
6. The application of the item as part of a play frame or any other construction will have to be such that it excludes all
risks of entrapment.
7. When mounting or assembling the product attention should be given to the minimum required distance between the
product and eventual obstacles: walls, fencing,... The distance should be a minimum of 2 m. There cannot be an over-
lapping of surrounding free spaces or safety areas.
8. In this safety area no hard, angular or pointed objects should be present. The surface underneath the product should
be fl at and shockabsorbing. The product must not be placed on asphalt, concrete or any other hard surface. We advise
the removal and storage of all accessories during the winter because the characteristics of the soil (when frozen) are
not suitable for safe play.
9. Please ensure that the tree, branch or construction to which the zip wire is attached, is able to support a weight of
300 kg.
10. All pieces should be checked regularly. For replacement material and expansion of the playground equipment, please
contact the supplier. Consequently safety will be guaranteed.
INSTRUCTIONS FOR CABLE HEIGHT
In order to assemble the zip wire correctly and safely, the following height requirements need to be followed. One end of
the cable must be mounted at a higher level than the other end. These heights are dependant on the height of the user
and the distance between the fi xing points. In order to determine the right heights, the following steps must be followed:
1. Measure the height of the user. If there is more than one user, and the difference in height is less than 15 cm, use the
height of the tallest user. If the difference is more than 15 cm, the zip wire needs to be adjusted every time the user's
height is outside the specifi ed range.
2. Add 75 cm to the measured height of the user and mark this point on the tree or construction frame.
3. Measure the distance between the 2 fi xing points. Determine the corresponding height in the following table and mark
this height on the tree / construction at the other side.
height
height lowest
height highest fi xing point according to the following
user
fi xing point (x)
distances between the 2 fi xing points (y)
24,50 m
1,20 m
2,00 m
2,90 m
1,40 m
2,10 m
3,00 m
1,50 m
2,30 m
3,20 m
1,70 m
2,45 m
3,35 m
1,80 m
2,60 m
3,50 m
GUIDELINES FOR USE
1. Always start from a secure and stable platform.
2. Always hold the trolley fi rmly with both hands (or hold on tight to the rope of the monkey swing if applicable).
3. Release the trolley only when it has reached complete standstill, and feet can be placed onto the ground/platform.
4. Always use the product under supervision of an adult.
5. Always check the structure, fi xings, trolley, cable tensioners, cable spanner and cable before using the zip wire.
6. Do not allow children under, next to or in the neighbourhood of the construction when it is in use.
7. Do not wear loose fi tting clothing (ponchos, scarfs,...) when using the zip wire. This can be dangerous because of en-
trapment risk.
8. Do not use the zip wire when the construction and the trolley are wet.
9. Only the KBT monkey seat with special D-shackle is permitted to be attached to the trolley of the zip wire. The use of
any other seats, ropes.... is considered as inappropriate use and is deemed to be dangerous.
2
zip wire 'para'
EN
21,50 m
18,50 m
15,50 m
12, 50 m
2,75 m
2,60 m
2,45 m
2,30 m
2,90 m
2,75 m
2,60 m
2,45 m
3,00 m
2,90 m
2,75 m
2,60 m
3,20 m
3,00 m
2,90 m
2,75 m
3,35 m
3,20 m
3,00 m
2,90 m
ASSEMBLY - MONTAGE - MONTAJE
MONTAGGIO - MONTAŻ
FIG II
ASSEMBLY - MONTAGE - MONTAJE - MONTAGGIO - MONTAŻ
5
7
6
7
8
15
Instructions for use - M244.04 - zip wire 'para'
Publicidad
Tabla de contenido
