Emerson Quiet Kool 18 SEER Serie Manual Del Usuario página 12

Installation Instructions
Indoor unit installation
FOR the Wooden Wall Mounting Plate
Decide an installing location for the mounting plate according to the indoor unit location and piping
direction.
Note: it is recommended to install screw anchors for sheet rock, concrete block, brick and such type of wall.
Keep the mounting plate horizontal with a horizontal level or dropping line. .
Mark the center of the indoor unit on mounting plate for future reference.
Note: the center of the mounting bracket may be not the center of the indoor unit.
Tapping mounting plate to the wall with a minimum of five screws, evenly spaced to properly support
indoor unit weight.
Note: The shape of your mounting plate may be different from the one above, but the installation method is similar.
Note: As the above figure shown, the six holes matched with tapping screw on the mounting plate must be used to
fix the mounting plate, the others are prepared.
MOUNTING BRACKET DIAGRAMS AND DIMENSIONS (Recommended)
10