How To Use; Start Cooking; Finish Cooking - MiLECTRIC ECM-3F Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Make sure that the base of your pan is smooth, sits flat against the glass, and is the same size as the
cooking zone. Always centre your pan on the cooking zone.
Always lift pans off the ceramic hob – do not slide, or they may scratch the glass.

3.3 How to use

3.3.1 Start cooking

After power on, the buzzer beeps once, all the indicators light up for 1 second then go out, indicating that
the ceramic hob has entered the stat of standby mode.
Touch the ON/OFF
show "-"
Place a suitable pan on the cooking zone that you wish to use.
• Make sure the bottom of the pan and the surface of the
cooking zone are clean and dry.
Select a heat setting by touching the "-" or "+" control.
• If you don't choose a heat setting within 1minute, the
ceramic hob will automatically switch off. You will need to start
again at step 1.
• You can modify the heat setting at any time during
cooking.
• By holding down either of these buttons, the value will
adjust up or down.

3.3.2 Finish cooking

Turn the cooking zone off by scrolling down to " 0 " or touching
"-" and "+" control together
control. all the indicators
10
OR

Publicidad

Tabla de contenido
loading

Tabla de contenido