Dexter 12VSD2-21.5A Instrucciones Legales Y De Seguridad página 93

FR
2. GENERAL POWERTOOL SAFETY WARNINGS
ES
c) Disconnect the plug from the power source and/or remove the battery pack, if detachable, from the power tool
PT
before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk
of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these
IT
instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
e) Maintain power tools and accessories. Check for misalignment or binding of moving parts, breakage of parts and
any other condition that may
EL
Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to
control.
PL
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the
working conditions and the work to be performed. Use of the power tool for operations d
hazardous situation.
UA
h) Keep handles and grasping surfaces dry, clean and free from oil and grease. Slippery handles and grasping surfaces do not
allow for safe handling and control of the tool in unexpected situations.
RO
5) Battery tool use and care
a) Recharge only with the charger spec ed by the manufacturer. A charger that is suitable for one type of battery pack may create a
EN
risk of re when used with another battery pack.
b) Use power tools only with spe
c) When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or
other small metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may
cause burns or a
d) Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs,
with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
e) Do not use a battery pack or tool that is damaged or m
resulting in e, explosion or risk of injury.
f) Do not expose a battery pack or tool to e or excessive temperature. Exposure to e or temperature above 130 °C may cause
explosion.
g) Follow all charging instructions and do not charge the battery pack or tool outside the temperature range spe ed in
the instructions. Charging improperly or at temperatures outside the
6) Service
a) Have your power tool serviced by a
the safety of the power tool is maintained.
b) Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized
service providers.
ect the power tool's operation. If damaged, have the power tool repaired before use.
cally designated battery packs. Use of any other battery packs may create a risk of injury and
.
d repair person using only identical replacement parts. This will ensure that
Damaged or ed batteries may exhibit unpredictable behaviour
ed range may damage the battery and increase the risk of re.
5
t from those intended could result in a
.
h