Mr Handsfree Blue Smart Manual Del Usuario página 12

PAIRING, CONNECTION AND DISCONNECTION
A. PAIRING
• For pairing the mr Handsfree Blue Smart with your Bluetooth
item "Pairing". Press
corresponding voice prompt "Activated". The LED indicators in the remote control will be flashing alternately.
• Activate the Bluetooth
• Search for available Bluetooth
®
Bluetooth devices within 10 meters distance and display them as a list.
• Select "Blue Smart" from the list.
• Enter the passkey "0000". "Blue Smart" will be stored in the list of paired devices in your phone.
• When the pairing has been successful, the green and red LED indicators will light continuously.
Your Blue Smart can store pairing information for up to 2 different Bluetooth
than 2 devices is made, the oldest paired device is removed from the memory.
Note:
To pair a second mobile phone with your Blue Smart carkit, you should follow the same procedure as described
above for pairing the first mobile phone. After switch on, the Blue Smart will automatically search for the last mo-
bile phone it was connected to (which was last used with the carkit). In case this phone is not available, the Blue
Smart will automatically search for the other paired phone for connection.
B. CONNECTION
In some cases the device could be disconnected from your phone. For example, if the Blue Smart was switched off. To
restore the connection between the Blue Smart and your phone:
• Switch on the power and the connection will be restored automatically; OR
• Use the central button
• Press the green button
C. DISCONNECTION
Sometimes you need to disconnect your phone from the Blue Smart. For example, if the phone should communicate with
another Bluetooth ® device. To disconnect the Blue Smart and your phone:
• Switch off the Blue Smart; OR
• Use the central button
• Take the phone more than 10 meters away from the Blue Smart; OR
• Disconnect the Blue Smart and the phone through the phone's menu.
Note:
If the Blue Smart and your phone were disconnected and you want to reconnect them it is not necessary to pair
these 2 devices again. Restoring of the connection will be performed without asking for the access code.
OPERATION
1. MAKING A CALL
Using your mobile phone:
Enter and dial the number on the mobile phone as you normally do.
Using voice dialing:
If your phone supports voice dialing and there are saved voice tags (names), you can use this function via the Blue Smart.
Before using this function make sure that you have saved voice tags for voice dialing in your phone.
to confirm. Now your Blue Smart is in pairing mode. You will hear a confirmation tone and the
®
function in your mobile phone.
® devices by entering the corresponding submenu of the phone. Your phone will find all
to go to "Connection" and press
once.
to go to "Disconnection" and press
® mobile phone, you should press
®
telephones. When an attempt to pair more
; OR
; OR
GB - 9
and go to the menu