Kohler K-3326R Guia De Instalacion página 4

Bracket Assembly
Bottom Bracket
Cabinet
Wall
Sink
2. Install the Sink
CAUTION: Risk of personal injury or product damage. Large
sinks are very heavy. Get help lifting the sink.
Position the sink directly on the cabinet. The side edges of the
sink should line up with the edges of the cabinet.
Assemble the brackets with the screws provided. Thread the
screws only halfway.
Hang two bracket assemblies from each of the side and back sink
grooves, and position them as shown. Make sure the bottom of
the sink rim touches the top of the cabinet. Hold the bottom
bracket sections against the (3/4" (2 cm) thick) cabinet walls, and
mark the hole locations.
Remove and disassemble the brackets.
Remove the sink from the cabinet.
Line up the bottom bracket sections with the marks on the
cabinet walls (minimum 3/4" (2 cm) thick), and secure to the
walls with wood screws. Securely tighten the screws, but do not
overtighten.
Install the faucet and the strainer(s) to the sink according to the
manufacturer's instructions.
Set the sink on the cabinet so the edges line up with the cabinet
sides and back.
Hang the top bracket sections from the side and back grooves of
the sink, and position them over the bottom bracket sections.
Loosely assemble the bracket sections with the screws.
1019937-2-B
Sink Groove
Cabinet Wall
Bottom
Bracket
12"
(30.5cm)
Bracket
5"
(12.7cm)
TOP VIEW
Countertop
Front of Cabinet
4
Screws
Finished Wall
Countertop
Kohler Co.