SOMFY Sonesse 40 Zigbee Instrucciones página 10

EN
2.1.4. Assembling the tube / drive assembly
Attention
The screws or pop rivets must only be fastened onto the
drive wheel and not on the drive.
If necessary, screw the bracket adapter to the drive head.
Assemble and fix the drive/tube assembly onto the end bracket g
and onto the drive bracket f.
Attention
Ensure that the drive/tube assembly is secured onto the end bracket. This operation prevents
the drive/tube assembly from coming out of the end bracket mounting.
Attention
For optimal radio reception, the motor antenna should be kept straight and should be
positioned outside of headrail (if used).
2.2. WIRING
Precaution
• Cables which pass through a metal wall must be protected and isolated using a sheath or
sleeve.
• Attach cables to prevent any contact with moving parts.
• The drive cable cannot be removed. If it is damaged, return the drive to the After-Sales
department.
Attention
Leave the drive power supply cable accessible: it must be possible to replace it easily.
- Switch off the power supply.
- Connect the drive according to the information in the
table below:
Neutral (N)
White
2.3. COMMISSIONING
2.3.1. Start-up
To set the drive, you need to access and use Set&Go Connect Application, You must have a compatible
phone or mobile device and access to the internet.
The App is downloadable for free from Apple Store platforms and Google Play Store on the following
mobile devices:
• Apple iPhone® mobile phone or mobile device with iOS operating system running iOS 11 and later.
• Mobile phone or mobile device with operating system Android™ OS 6.0 and later.
The software version of the Set&Go Connect Application may be updated from time to time to add
new features and services.
10
120 V 60 Hz
Live (L1) Live (L2)
Black
Copyright © 2018 SOMFY ACTIVITES SA, Société Anonyme All rights reserved.
f f
OFF
120 V
Red
N L1 L2
Sonesse® 40 Zigbee
L
g g
60 Hz