Selecting Cooktop Settings; How To Synchronize Left Elements - Monogram ZHU30 Manual Del Propietário

Estufa de inducción
Ocultar thumbs Ver también para ZHU30:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

USING YOUR COOKTOP

SELECTING COOKTOP SETTINGS

Choose the element/burner that is best fit to the cookware
size. Each element/burner on your new cooktop has its
own power levels ranging from low to high. Power level
settings necessary for cooking will vary depending on the
cookware being used, the type and quantity of food, and
the desired outcome. In general use lower settings for
melting, holding and simmering and use higher settings for
heating quickly, searing and frying. When keeping foods
warm confirm selected setting is sufficient to maintain food
temperature above 140°F. Larger elements and elements
marked "Keep Warm" are not recommended for melting.
Hi is the highest power level, designed for large quantity
rapid cooking and boiling. Hi will operate for a maximum of
10 minutes. Hi may be repeated after the initial 10 minute
cycle by pressing the + pad.

HOW TO SYNCHRONIZE LEFT ELEMENTS

To Turn On
Hold the Sync Burners pad for about half a second to
connect the two burners. Operate either element as
described on page 8 to adjust power level.
49-80826 Rev. 4
CAUTION
Do not place any cookware, utensils or
leave excess water spills on control key pads. This may
result in unresponsive touch pads and turning off the
cooktop if present for several seconds.
To Turn Off
1. Touch the On/Off pad on either burner to turn off the
Sync Burners.
or
2. Touch the Sync Burners to turn both burners off.
Hi
boiling quickly
frying
searing
reducing
simmering
holding
Low
melting
9

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Zhu36

Tabla de contenido