EuroSteam Stone Glide 6198 Manual De Instrucciones página 6

3. On and Off
To turn on your Eurosteam® iron, place the iron in a vertical position, if not placing on an
ironing board iron holder, or heat resistant mat. Always ensure the iron is on a stable surfa-
ce, and plug into a power surge protection bar. The indicator light will switch on. When the
indicator light turns off the Eurosteam® is ready for use. The indicator light will go on and off
through out the ironing session, it indicates that the boiler is constantly heating and pressu-
heat resistant mat.
*IMPORTANT*
NEVER unscrew the safety cap while the Eurosteam ® iron is producing steam
and the boiler is under pressu e. This could lead to burning and or scalding.
r
To turn off, carefully grasp plug and remove from power surge protection bar. Allow iron to
or a heat resistant mat, until completely cool. Remove safety cap and drain remaining water
from boiler tank. Store iron in a safe place with safety cap off.
4. Filling the Tank while using the Iron
protection bar and fully depress the steam button to let out all residual steam. Slowly un-
screw the safety cap, this is made easier with the use of the cap remover. Drain remaining
water from boiler tank. Use caution as water may still be hot. SLOWLY pour a small amount
of water into the tank with the measuring cup, 2-3 times, and allow the steam to come out
*For best ironing results use a mesh-type ironing board to allow
TIP
excess steam to escape.
®
*Always rest your Eurosteam iron on stable surface.
*Do not let soleplate contact anything that could scratch or
damage the soleplate, such as zippers or metal studs.
USING THE EUROSTEAM ® IRON
6