EuroSteam Stone Glide 6198 Manual De Instrucciones página 8

*
Demonstration video and trouble shooting at www.redfernent.com*
Why is my iron leaking water?
*Boiler has not been primed, see top of page 5 for instructions
*Indicator light is on while pushing the steam button, wait for indicator light to go out before
ironing
*Iron safety cap may not be tight enough
*The iron is cooling down due to not using the iron immediately after the indicator light shuts
off (As a safety feature the Eurosteam ®
-
tely 1-2 minutes of non-usage, holding the steam button down until the indicator light comes
on and wait for the indicator light to shut off and it is once again ready for use immediately).
Why do I have to empty my iron after every use?
This will require you to clean your iron more frequently.
Please refer to page 5 section 1
Why does my iron run out of steam quickly?
We do suggest to use your steam button only on demand. Two seconds of depressing the
button intermittently (once every 5-10 seconds) this will allow you a good amount of steam.
Once you have mastered this, you will never go back to any other iron!
How do I clean my iron?
See page 7 section 5
Why does the indicator light come on while the iron is in use?
When the water inside the boiler begins to cool, the indicator light will come on indicating
that the iron is heating. Once the water in the boiler reaches the optimal temperature, the
indicator light will shut off. It is very normal to see it repeating itself. Especially if you are
8
TROUBLE SHOOTING/FREQUENTLY ASKED QUESTIONS