Child Lock - EAS ELECTRIC EMBV38DTN Manual De Instrucciones

8.4Pause In The Process Of Cooking
8.4.1You can stop the cooking process at any time by pressing"
when the appliance suddenly stops working, but Screen still displays the rest of the operating time still.
If you wish, at this time you can:
Turn or stir the food to ensure it will be evenly cooked；
Modify the process parameters；
Cancel the process by pressing"
To start the process, closethe door and press"
8.4.2Modifying parameters
The operating parameters (time, weight, power, etc.) can only be modified when the cooking process has been
interrupted. Proceed as follows:
After pressing" "one second under standby mode the appliance will switch to function menu.
Press" "and" " or "
Press" "to switch to Power Setting Model；
Press" "to continue cooking process。
End cooking and cancel program
8.5
At the end of the process you will hear three beeps and the display will show the word „End‟， The symbol"
The beeps repeat every 30 seconds in five minutes until the door is opened or "
the OFF setting
During the process of setting programm or oven working，press "
working to go into standby mode
8.6Show Room and Child Lock
8.6.1 Show Room (the appliance seems working but heating elements with no power)
Under standby mode, press"
Now press " " or "
closed. After setting, press"
normal using, it should be set to off showing mode. So this function is not required to be set.
Under showing mode, whatever function is chosen, the symbol "

8.6.2 Child Lock

On Lock:Under standby mode or working process, press "
sound "di".
Unlock: Press " " for 3 seconds，the appliance will be unlocked after a sound "di". The symbol "
8.7Cooling Fan System
The appliance is equipped with a cooling system which comes into operation as soon as a cooking function
starts.
Operation of the fans generates a normal air flow which comes out above the door and may continue for a short
time even after the appliance is switched off.
8.8 Door Interlock Switch
The light is on when the door interlock switch is not connected or closed incompletely, and it is available to set
the parameter, but you can't start the microwave.
The screen displays "door" when you press Start/Pause button, in the condition that the door interlock switch is
not connected or not closed. It would return to setting interface after 3 seconds.
"for 1 second；
"to set cooking time；
" and " " at the same time until the words "OFF SHO"appear on the screen。
" once, the appliance goes in showing mode. Press "
"to go back to standby mode. Notice: The showing function is convenient for sales, for
"or by opening the oven door. At the same time
"。
" the for 1 second and the appliance stops
" lights after pressing "
" for 3seconds，the appliance will be locked with a
10
"is pressed. The oven returns to
" or " "again, showing mode will be
" .
" disappears.
"light.
V.1