Safety Regulations With Respect To Maintenance - Holmatro AHS 1400 FDU Manual

EN
2.7

Safety regulations with respect to maintenance

• Wear personal means of protection when performing maintenance tasks.
• Never work in a way that could jeopardize safety.
• Make sure that the equipment cannot roll away or tip over. The control and drive must be switched
off and safeguarded against unexpected activation.
• Make sure that moving parts do not move unexpectedly.
• Used or leaked fluids, and any other products consumed during the activities, must be collected and
disposed of in a environmentally responsible way.
3 Description
3.1 Equipment
The pump operates according to the booster principle. The inlet air pressure is amplified to an
approximately 100 times higher hydraulic pressure by a pneumatic plunger connected to a hydraulic
plunger. Each pump is provided with a safety valve to limit the maximum pressure. Never change the
setting of the safety valve.
Depending on the type of the hydraulic coupler, the pump is suitable for use in combination with the
CORE™ or dual-hose system.
3.1.1 Type designation
Example: AHS 1400 FDU
/i
Digit Example
1-3 AHS
4-7 1400
8-10 FDU
11 C
3.2 Product identification
Refer to Fig. 2.
/i
1 Air connection
2 Foot pedal
3 Oil tank
4 Female coupler (AHS 1400 FDU)
No coupler (AHS 1400 FDU C)
3.3 Weight and dimensions
Refer to Fig. 3.
/i
Model Part number
AHS 1400 FDU 150.602.001
AHS 1400 FDUC 150.152.584
26
Description
AHS = Air powered hydraulic supply
Hydraulic oil tank capacity in cm
Version
Type of hydraulic coupler
C = CORE™ couplers
blank = Dual-hose couplers
5
6
7
Type of
coupler
Dual-hose
CORE™
916.219.125_005
3
(cc)
Hydraulic oil filling/vent cap
Valve for air supply
Male coupler (AHS 1400 FDU)
CORE™ coupler (AHS 1400 FDU C)
Weight Length
(kg) (A) (mm)
7.0 373
6.9 333
Width Height
(C) (mm) (B) (mm)
125 200
125 200
AHS