Levelling The Washing Machine - EAS ELECTRIC EMW1055GW Manual De Usuario

INSTALLATION

Levelling the washing machine

！
Warning!
• The lock nuts on all four feet must be screwed tightly against the housing.
Check if the legs are closely attached to the cabinet. If not, please turn them to
1.
their original positions tighten the nuts.
2.Loosen the lock nut turn the feet until it closely contacts with the floor.
3.Adjust the legs and lock them with a spanner, make sure the machine is steady.
Connect Water Supply Hose
！
Warning!
• To prevent leakage or water damage, follow the instructions in this chapter
• Do not kink, crush, modify or sever
• For the model equips hot valve,connect it to hot water tap with hot water supply
hose. Energy consumption will decrease automatically for some program.
Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe.
Connection between screw tap and inlet hose.
Tap with threads and inlet hose
Connect the other end of inlet pipe to the inlet valve at the backside of product
and fasten the pipe tightly clockwise.
water Inlet valve
1
Raise
water supply hose
2
Lower
water inlet hose .
11
3
Lock nut
foot
V.1
4
!