EAS ELECTRIC ECH R32 Serie Manual De Instalación Y Usuario página 68

Press the "◄" and "►" buttons to set the
parameter, and press the "OK" button to save
the setting and return to the previous
interface,or press the "BACK" button to cancel
the setting and return to the previous
interface.
After the silent mode function setting is
enabled,the icon "
home page interface.
◆
Double Setpoint:
Press the "▲" and "▼" buttons to select
"DOUBLE SETPIONT" in the "USER MENU"
interface, and press the "OK" button to enter
the interface. The interface display is as
follows:
DOUBLE SETPOINT
DOUBLE SETPIONT
DISABLE
OK
Press the "▲" and "▼" buttons to select the
ENABLE or DISABLE, and press the "OK"
button to save the setting.If setting the
DISABLE then return to the previous
interface.If setting the ENABLE then enter the
interface as follows:
" will be displayed on the
DOUBLE SETPOINT
SET
POINT
COOL_1
COOL_1 HEAT_1
7
35
ok
Operation instructions:
Press the "◄" and "►" buttons to select
setpoint mode, press the "▲" and "▼" buttons
to set the parameter value,and press the "OK"
button to save the setting and return to the
previous interface,or press the "BACK" button
to cancel the setting and return to the previous
interface.
The main control board detects if the port
"TEMP-SW"is closed,and if the port is closed
the units will run according to the temperature
of "SET POINT COOL_2" or "SET POINT
HEAT_2",other wise ,the units run according
to the temperature of "SET POINT COOL_1"
or "SET POINT HEAT_1".
◆
Temperature compensation:
Press the "▲" and "▼" buttons to select
"TEMPERATURE COMPENSATION" in the
"USET MENU" interface, and press the "OK"
button to enter the interface. The interface
display is as follows:
12
SET SET
POINT POINT POINT
COOL_2 HEAT_2
7
V.1
SET
30