EAS ELECTRIC ECH R32 Serie Manual De Instalación Y Usuario página 71

◆
Set unit air-conditioning:
Press "▼" and "▲" buttons to select the
"SET UNIT AIR-CONDITIONING" in the
"PROJECT MENU" interface, and press
the "OK" button to enter the interface. The
interface display is as follows:
SET UNIT
Tw_cool Tw_heat
_Diff _Diff
2℃ 2℃
OK
Presss the"◄" and "►" buttons to select the
desired option, and press "▲" and "▼"
buttons to set the temperature and press the
"OK" button to save the setting and return to
the previous interface,or press the "BACK"
button to cancel the setting and return to the
previous interface. If there is no operation in
60 seconds, the wired remote controller will
return to the home page.
◆
Set parallel unit:
Press "▼" and "▲" buttons to select the
"SET PARALLEL UNIT" in the "PROJECT
MENU" interface,and press the "OK" button
to enter the interface, The interface display is
as follows:
dT5_ON
dT1S5
8℃ 10℃
SET PARALLET UNIT
Tim_
Tw_diff
Cap_Adj
80s 2℃
OK
Presss the"◄" and "►" buttons to select the
desired option, and press "▲" and "▼" buttons
to set the temperature and press the "OK"
button to save the setting and return to the
previous interface,or press the "BACK" button
to cancel the setting and return to the previous
interface. If there is no operation in 60
seconds, the wired remote controller will return
to the home page.
◆
Set unit protection:
Press "▼" and "▲" buttons to select the "SET
UNIT PROTECTION" in the "PROJECT
MENU" interface,and press the "OK" button to
enter the interface, The interface display is as
follows:
SET UNIT PROTECTION
T_Diff
_Pro
12℃
OK
15
Ratio_ Ratio_
cool_ heat_
first first
50% 50%
V.1