Nogueira NEW PECUS G2 Serie Manual De Instrucciones página 163

Lift the protective cover (F);
7.
Fit the inverter tool (G) to the gearbox shaft
8.
end
Using your hands, turn the inverter tool in the
9.
direction shown in the illustration. The feeding
rollers will rotate in the opposite direction to
the working direction, expelling (throwing
out) accumulated material into the platform.
Rotate until all material is removed.
After the "unclogging", remove the
10.
inverter tool (G) and store it;
Lower the protective cover (F);
11.
Fit the bolt, the two flat washers and
12.
the nut (E).
Instructions Manual
5. Operation
F
E
G
59