How To Replace The Bottom Counter Knife - Nogueira NEW PECUS G2 Serie Manual De Instrucciones

6. Maintenance
Using the pin punch found in the machine
6.
toolbox, remove the safety pin (H) that is
broken;
NOTE: Generally, the broken pin is located in the
biggest gear's shaft.
Install a new safety pin;
7.
Using a compression punch, crimp the pins'
8.
ends so that they are tightly-mounted;
Replace the gearbox (F), the gears (E), the
9.
cover (D), close the platform fairing (B) and
replace the bolt (A).

6.1- How to replace the bottom counter knife

ATTENTION!
Turn off the tractor and remove
the ignition key before starting the
following procedure.
Tilt the machine slightly back and support it
1.
with wooden shims;
Remove the serrated counter knife (A) by
2.
loosening the 4 bolts (B);
Mount the new serrated counter knife, fixing
3.
it with the 4 bolts (B).
n
ote the coRRect mounting side When fixing
the seRRated counteR knife in the machine
t ppe (p
he use of eRsonal
is mandatoRy duRing opeRation
adjustment of the machine
and eye pRotection
aReas that can cause injuRy if handled Without
pRopeR pRotection and caRe
84
ATTENTION!
p e
Rotective quipment
,
maintenance and
. W
eaR suitable gloves
. t
he counteR knife has shaRp
.
Instructions Manual
H
H
.
)
H
B
A