Sharpening Chopping Rotor Knives - Nogueira NEW PECUS G2 Serie Manual De Instrucciones

6. Maintenance

6.1- Sharpening chopping rotor knives

The sharpener incorporated into the harvester
makes it possible to sharpen the all rotor knives
at the harvest place.
Sharp knives require less tractor power to cutting
plants, decrease fuel consumption and guarantee
the best cutting quality.
For safety reasons, before starting the
sharpening, remove the cutting gears.
With this procedure, the feeding drums
will stop working, providing greater safety
during sharpening.
ATTENTION!
Turn off the tractor and remove
the ignition key before starting the
following procedure.
6.1.1- Removing the cutting gears
before sharpening:
Remove the bolt (A);
1.
Lift the platform fairing (B) and secure with
2.
the rod (C);
Remove the 2 bolts (J) and the cover (D) from
3.
the cutter set box;.
Remove the cutting gears (F).
4.
Replace the cover (D) before starting to
sharpen.
70
ATTENTION!
ATTENTION!
Instructions Manual
A
J
shaRpeneR
B
C
J
D
F