Battery Operation - Medela Single Deluxe Instructivo De Uso Y Armado

Battery Operation

1. To install batteries, slide off the battery
compartment cover by grasping both sides
and gently rocking the cover back and forth.
Install two fresh AA 1.5 V batteries. While
the pump will work with alkaline, disposable
or nicad rechargeable batteries, alkaline
batteries are recommended for optimum
performance.
CAUTION: When using the pump with batteries, the pumping cycle may slow as the
batteries wear down. Slower cycles may cause some discomfort. If this happens,
reduce the vacuum with the vacuum regulator and replace the batteries as soon as
possible.
NOTE: You do not need to remove the batteries to use electricity to power the pump.
Electric Operation
1. Insert the metal plug on the end of the
transformer cord into the hole on the side of
the motor unit.
2. Set vacuum regulator ring to "MIN." Adjust
for comfort once pumping begins.
3. Center breastshield over your nipple and
start pumping.
5