Andset Sound Signals; Roubleshooting Uide; Telephone Solutions - GE 27959 Guia Del Usuario

H S
ANDSET OUND
Signal
A long warbling tone (with ringer on)
Three short beeps
One short beep (every 7 seconds)
T
ROUBLESHOOTING
T S
ELEPHONE OLUTIONS
No dial tone
• Check and repeat installation steps:
Ensure the base power cord is connected to a working outlet .
Ensure the telephone line cord is connected to the base and the wall
jack .
• Connect another phone to the same jack; if there is still no dial tone, the
problem might be your wiring or local service.
• The cordless handset may be out of range of the base. Move closer to
the base.
• Ensure the battery is properly charged (12 hours).
• Ensure the battery pack installed correctly.
• Did the handset beep when you pressed the TALK/callback button? The
battery may need to be charged.
• Place handset in charge cradle for at least 20 seconds.
Dial tone is OK, but can't dial out
• Make sure the tone/pulse setting on the base is set to the type of phone
service you are subscribed to.
42
S
IGNALS
G
UIDE
Meaning
Signals an incoming call
Page signal
Low battery warning