EN
Hose Reel Ser. 888/889
•
Check that swivel and hose couplings don't leak. Change the seal if
required. Clean the swivel and couplings.
•
Check that the hose is intact. Clean the hose if it is oiled or dirty.
•
Check the reels ratchet mechanism.
•
Check the mounting of the reel on wall or ceiling.
4.1
Repair instructions
WARNING!
Before starting any operation in the reel:
• 1. Turn off the supply of air/water/oil/grease.
• 2. Neutralize the spring power by removing the hose-stop and let the hose
recoil.
See figure 9.
Instructions for hose fitting, see 3.4. Hose fitting.
Instructions for changing the spring, swivel or seal comes with each spare part.
4.2
Spare parts
Contact your nearest authorized distributor or Nederman for advice
on technical service or if you require help with spare parts. See also
www.nederman.com.
Ordering spare parts
When ordering spare parts always state the following:
•
Part number and control number (see the product identification plate).
•
Detail number and name of the spare part (see www.nederman.com).
•
Quantity of the parts required.
5
Recycling
The product has been designed for component materials to be recycled. Its
different material types must be handled according to relevant local regulations.
Contact the distributor or Nederman if uncertainties arise when scrapping the
product at the end of its service life.
12
Risk of personal injury.