Descargar Imprimir esta página

Horizon Global 24984 Instrucciones De Instalación

Mazda 2019 -current

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Website:
www.horizonglobal.com
Technical Assistance: 800-632-3290
TechnicalSupport@horizonglobal.com
To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE:
ALWAYS read, understand and follow warnings and instructions
for your hitch BEFORE installation. Keep for future reference.
DO NOT cut, weld or modify this receiver.
CHECK all fasteners are tight and your hitch is securely mounted
to your vehicle periodically.
ALWAYS read, understand and follow all warnings and
instructions for your vehicle and for other accessories you will use
with your hitch BEFORE use.
LOAD the trailer heavier in front.
DO NOT exceed lower of towing vehicle manufacturer's rating or:
Hitch Type
Max Gross Trailer
Weight Carrying
2000 lb. (908 kg)
Weight Distributing
ALWAYS wear your seatbelt.
SLOW DOWN when towing, NEVER exceed any posted speed limit.
If EXCESS SWAY occurs, take your foot off the gas pedal and hold
the steering wheel as steady as possible. DO NOT apply your
brakes and DO NOT speed up.
©2019 Horizon Global™ Corp - Printed in Mexico
Installation Instructions
PART NUMBERS: 24984, 77984, CQT24984
Max Tongue
Weight
Weight
200 lb. (90.8 kg)
X
X
LIMITED LIFETIME WARRANTY
Limited Lifetime Warranty ("Warranty"). Horizon Global ("We", "Us" or "Our")
1.
warrants to the original consumer purchaser only ("You" or "Your") that the product will be
free from material defects in both material and workmanship, ordinary wear and tear
excepted. The Warranty is valid only if (a) the products are returned to Us for inspection and
testing; (b) Our inspection discloses to Our satisfaction that any alleged nonconformance are
material and have not been caused by misuse, neglect, wear and tear, improper installation,
unsuitable storage, improper repair, alteration, or accident; and (c) the products were
installed, maintained and used in accordance with Our instructions. THE WARRANTY IS
MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (OTHER
THAN THE WARRANTY OF TITLE AS PROVIDED BY THE UNIFORM
COMMERCIAL CODE IN EFFECT IN MICHIGAN), INCLUDING WITHOUT
LIMITATION, ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE, SAID WARRANTIES BEING EXPRESSLY DISCLAIMED.
2.
Obligations of Purchaser. To make a Warranty claim, contact Us at our principal address of
47912 Halyard Drive, Suite 100, Plymouth, MI 48170, 1-800-632-3290, identify the product
by model number, and follow the claim instructions that will be provided. Any returned
product that is replaced by Us becomes our property. You may be responsible for return
shipping costs. Please retain your purchase receipt to verify date of purchase and that You
are the original consumer purchaser. The product and the purchase receipt must be provided
to Us in order to process Your Warranty claim.
3.
Exclusive Remedy. Product replacement is Your sole and exclusive remedy under this
Warranty. We shall not be liable for service or labor charges incurred in removing or
replacing a product. IN NO EVENT WILL WE BE RESPONSIBLE FOR ANY INDIRECT,
SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES.
4.
Assumption of Risk. You acknowledge and agree that any use of the product for any
purpose other than the specified use(s) stated in the product instructions is at Your own risk.
5.
Governing Law. This Warranty gives You specific legal rights, and You also may have
other rights which vary from state to state. This Warranty is governed by the laws of the
State of Michigan, without regard to rules pertaining to conflicts of law. The state courts
located in Oakland County, Michigan shall have exclusive jurisdiction for any disputes
relating to this Warranty.
Rev 8/2015
Sheet 1 of 27
Scan for safe towing
tip, or visit
http://qr.towingpro
ducts.net/qrproduct
s/qr-product
24984NP
6-15-19
Rev. A

Publicidad

loading

Resumen de contenidos para Horizon Global 24984

  • Página 1 TechnicalSupport@horizonglobal.com LIMITED LIFETIME WARRANTY Limited Lifetime Warranty (“Warranty”). Horizon Global ("We", “Us” or “Our”) warrants to the original consumer purchaser only ("You" or “Your”) that the product will be To prevent SERIOUS INJURY, DEATH or PROPERTY DAMAGE: free from material defects in both material and workmanship, ordinary wear and tear •...
  • Página 2: Installation Instructions

    MANUFACTURER’S RATING OR: Hitch Type Max Gross Trailer Weight Max Tongue Weight Weight Carrying 2000 lb. (908 kg) 200 lb. (90.8 kg) Weight Distributing Hitch Illustration ©2019 Horizon Global™ Corp - Printed in Mexico Sheet 2 of 27 24984NP 6-15-19 Rev. A...
  • Página 3 Observe safety precautions when working beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch. This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684. ©2019 Horizon Global™ Corp - Printed in Mexico Sheet 3 of 27...
  • Página 4 Press the bracket inwardly to release the piece from the plastic tab attached to frame rails. Return panel to vehicle owner. ©2019 Horizon Global™ Corp - Printed in Mexico Sheet 4 of 27 24984NP 6-15-19 Rev.
  • Página 5 2. Lower exhaust: Using exhaust removal pliers, remove the rearmost rubber hangers to lower the exhaust. Be sure to support exhaust to avoid damage. Note: Lubricant or soapy water may ease removal of rubber hangers. ©2019 Horizon Global™ Corp - Printed in Mexico Sheet 5 of 27...
  • Página 6 3. Enlarge the access hole: Using die grinder, enlarge the access hole to 1’’ diameter hole each side, see Figure 1. ©2019 Horizon Global™ Corp - Printed in Mexico Sheet 6 of 27 24984NP 6-15-19 Rev. A...
  • Página 7 4. Bend heat shield: Slightly bend the heat shield away from the hitch mounting area. ©2019 Horizon Global™ Corp - Printed in Mexico Sheet 7 of 27 24984NP 6-15-19 Rev. A...
  • Página 8 5. Install hitch: Feed the carriage bolts ① and spacers ② through the access holes using the pull wires ⑤. Leave pull wires attached. Raise the hitch and feed pull wire previously installed through hitch bracket slot. Remove pull wires and loosely install conical washers ③ and hex nuts ④ to hitch . ©2019 Horizon Global™ Corp - Printed in Mexico Sheet 8 of 27...
  • Página 9 Proper torque is needed to keep the hitch secure to the vehicle when towing. 7. Reinstall exhaust: Raise the exhaust back into position and reinstall all rubber hangers removed earlier. ©2019 Horizon Global™ Corp - Printed in Mexico Sheet 9 of 27...
  • Página 10: Garantie À Vie Limitée

    TechnicalSupport@horizonglobal.com GARANTIE À VIE LIMITÉE Garantie à vie limitée (« Garantie »). Horizon Global (« Nous », « Notre ») garantit à l’acheteur initial seulement (« Vous », « Votre ») que le produit sera exempt de vices de Pour prévenir les blessures SÉVÈRES, FATALES ou les DOMMAGES matières et de fabrication, exception faite de l’usure normale.
  • Página 11 Numériser pour des Instructions d’installation instructions avec PHOTOS ou visiter NUMÉROS DE PIÈCES : 24984, 77984, CQT24984 Site Internet: www.horizonglobal.com http://qr.towingprod ucts.net/qrproducts/q Assistance technique: 800-632-3290 r-product TechnicalSupport@horizonglobal.com Applications : Durée de l'installation : 40 min Années Marque Modèles La valeur indiquée ci-dessus est la durée moyenne des installeurs professionnels.
  • Página 12 Toujours porter des LUNETTES DE Visserie : 24984F PROTECTION pour installer l'attelage. ① Qté (4) Boulon de carrosserie NUMÉROS DE PIÈCE : 24984, 77984, CQT24984 Ensemble de barre de 7/16-14 x 1.75, GR5 remorquage autorisé : ② Qté (4) Espaceur .875 x 3.00 x .250 3593 (vendu séparément)
  • Página 13 (1) vis du point de fixation du support inférieur, de chaque côté. Presser le support vers l’intérieur afin de dégager la pièce de la languette en plastique fixée aux longerons. Remettre le panneau au propriétaire du véhicule. ©2019 Horizon Global™ Corp. - Imprimé au Mexique Feuille 13 de 27...
  • Página 14 2. Abaisser l'échappement : À l’aide d’une pince pour échappement, enlever les supports en caoutchouc les plus à l’arrière pour abaisser l’échappement. S’assurer de supporter l’échappement pour éviter les dommages. Nota : L’utilisation d’un lubrifiant ou d’eau savonneuse peut faciliter le retrait des supports en caoutchouc. ©2019 Horizon Global™ Corp. - Imprimé au Mexique Feuille 14 de 27 24984NP 6-15-19 Rev.
  • Página 15 3. Agrandir le trou d'accès : À l’aide d’une meule à rectifier, agrandir le trou d'accès jusqu’à 1 po de diamètre, de chaque côté, voir Figure 1. ©2019 Horizon Global™ Corp. - Imprimé au Mexique Feuille 15 de 27 24984NP 6-15-19 Rev.
  • Página 16 4. Courber l’écran thermique : Courber légèrement l’écran thermique à l’écart de la zone de montage de l’attelage. ©2019 Horizon Global™ Corp. - Imprimé au Mexique Feuille 16 de 27 24984NP 6-15-19 Rev. A...
  • Página 17 Soulever l’attelage et acheminer le fil de tirage (précédemment mis en place) à travers la fente du support d’attelage. Enlever les fils de tirage et poser lâchement des rondelles coniques ③ et des écrous hexagonaux ④ sur l'attelage. ©2019 Horizon Global™ Corp. - Imprimé au Mexique Feuille 17 de 27...
  • Página 18 Un couple de serrage approprié est nécessaire pour maintenir l’attelage fixé au véhicule lors du remorquage. 7. Réinstaller l’échappement : Soulever l'échappement en position et réinstaller les supports en caoutchouc enlevés plus tôt. ©2019 Horizon Global™ Corp. - Imprimé au Mexique Feuille 18 de 27...
  • Página 19: Garantía Limitada De Por Vida

    TechnicalSupport@horizonglobal.com GARANTÍA LIMITADA DE POR VIDA Garantía limitada de por vida ("Garantía") Horizon Global ("nosotros", "nos" o "nuestro/a/s") Para evitar DAÑOS DE GRAVEDAD, A LA PROPIEDAD O LA MUERTE: garantiza al comprador original únicamente ("usted" o "su/s") que el producto estará libre de defectos significativos tanto en materiales como en mano de obra, con la excepción del desgaste...
  • Página 20: Equipo Necesario

    Instrucciones de instalación Escanear para instrucciones de la instalación paso por NÚMEROS DE PARTES: 24984, 77984, CQT24984 paso con FOTO, o visitar Sitio web: www.horizonglobal.com http://qr.towingproducts. net/qrproducts/qr- Assistance técnica: 800-632-3290 product TechnicalSupport@horizonglobal.com Aplicaciones: Tiempo de instalación: 40 min Años Marca...
  • Página 21 Se debe retirar y reemplazar un enganche o esfera que se hayan dañado. Observar las precauciones de seguridad al trabajar por debajo del vehículo y usar protección visual. No cortar los orificios de acceso o accesorios con soplete. Este producto cumple con las especificaciones y requisitos de seguridad para conectar dispositivos y sistemas de remolque del estado de Nueva York, V.E.S.C. Regulación V-5 y SAE J684. © 2019 Horizon Global™ Corp. Impreso en México Hoja 21 de 27...
  • Página 22 10 mm, retirar (1) tornillo del accesorio de soporte inferior, por cada lado. Empujar el soporte hacia adentro para liberar la pieza de la pestaña de plástico que está unida a los largueros del bastidor. Devolver el panel al propietario del vehículo. © 2019 Horizon Global™ Corp. Impreso en México Hoja 22 de 27...
  • Página 23 2. Bajar el escape: Con los alicates para retirar el escape, retirar los ganchos de goma más posteriores para bajar el escape. Cerciorarse de apoyar el escape para evitar daños. Nota: El lubricante o el agua jabonosa pueden facilitar la extracción de los colgantes de goma. © 2019 Horizon Global™ Corp. Impreso en México Hoja 23 de 27...
  • Página 24 3. Agrandar el orificio de acceso: Con la amoladora de matriz, agrandar el orificio de acceso a 1'' de diámetro en cada lado, ver la Figura 1. © 2019 Horizon Global™ Corp. Impreso en México Hoja 24 de 27 24984NP 6-15-19 Rev.
  • Página 25 4. Doblar el protector de calor: Doblar ligeramente el protector de calor alejándolo del área de montaje del enganche. © 2019 Horizon Global™ Corp. Impreso en México Hoja 25 de 27 24984NP 6-15-19 Rev. A...
  • Página 26 Levantar el enganche y pasar el cable de insertar instalado anteriormente a través de la ranura del soporte del enganche. Retirar los cables de insertar y sin apretar instalar las arandelas cónicas ③ y las tuercas hexagonales ④ en el enganche. © 2019 Horizon Global™ Corp. Impreso en México Hoja 26 de 27...
  • Página 27 7. Volver a instalar el escape: Levantar el escape de nuevo a su posición y volver a instalar todos los colgantes de goma del escape que se retiraron anteriormente. © 2019 Horizon Global™ Corp. Impreso en México Hoja 27 de 27...

Este manual también es adecuado para:

77984Cqt24984