General Description; Assembly - GYS energy station Manual Del Usuario

Energy Station
Congratulations for the selection of this product which has been designed with a great care.
To get the best of it, please read carefully the following instructions. Keep this instruction
manual safe, you may want to read it again later.

General description

Energy Station is an autonomous starter designed to start vehicles with a 12V or 24V battery.
The trolley enables to place 1 or 2 12V batteries (6 2V cells) for a capacity up to 180Ah each.
The machine integrates 2 automatic battery chargers to charge the internal and external
batteries and a battery tester. In starter mode, the electronic of the vehicle is protected
against overvoltage.

Assembly

Trolley
Fastenings : 4 screws, 8 M5x12 screws, 2 M6x50 screws, 30 M8x12 screws, 30 M8 nuts.
Tools necessary for the assembly (not provided): 1 set of Allen keys, 1 wrench of 10 and 8, 1
screwdriver with screwdriver bit torx T20 (for the handle)
M8
x12
M8
x12
M8
x12
M5
x12
screws
M5
x12
M6
X50
screws
9/40