Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
• Secure the hose by using the clamp
Use the polystyrene shim included in your packaging to support the ceramic bowl during this
operation.
Option: Connection of a handbasin
•Connect the hand basin outlet Ø40 mm to the hose
• Secure the connection with a clamp
9.2 Connecting to the water supply
9.3 Remote button
When installing a wall casing, it is possible to move the control button to the top of the panel.
1
• Spread out the two lugs on each side.
• Remove the capsule.
• Unscrew the nut.
• Remove the entire button and proceed in reverse order to place it in the hole designed for this
purpose on your wall casing.
• Seal the hole in the bowl with the supplied cover.
24
supplied.
I
J
(see figure in 7.2).
• Connect the end of the water supply hose to the pre-
viously made connection.
✱
2
.
L
3
Publicidad
Tabla de contenido
