Cleaning & Maintenance; Cord Storage; Troubleshooting - Krups KM770D50 Manual Del Usuario

7. CLEANING & MAINTENANCE
„ „
To remove the used coffee grounds, remove the filter holder from the coffeemaker.
(Fig 8).
„ „
Unplug the appliance.
„ „
Do not clean the appliance when it is still hot.
„ „
Wash carafe, carafe lid and removable filter holder in hot, soapy water or place it in
the top rack of the dishwasher.
„ „
Clean with a soft cloth or a damp sponge. Never use harsh detergents or abrasive
cleaners on any part of the coffee maker.
„ „
To clean the stainless steel parts of your coffee maker, rinse a soft cloth or sponge in
warm water and squeeze out the excess water. Wipe the surface of the stainless steel
in the direction of the brush marks. Dry thoroughly and polish with a soft dry cloth.
„ „
For hard to remove stains, use a plastic mesh pad or cloth dampened in vinegar.
„ „
Do not immerse the appliance in water or place it under running water.
„ „
Any other servicing should be performed by an authorized service representative.
TIPS & ADVICE
Only place the carafe, carafe lid, and removable filter holder in the dishwasher.
All other parts of the coffee maker are not dishwasher safe.

Cord Storage

This feature allows you to store the power cord while the appliance is not in use and
disconnected from the power socket.
„ „
When you would like to store the cord, hold the power cord and push it inside the
appliance slowly, until a part of cord and plug remains outside the appliance.
„ „
When you would like to release the cord, hold the plug and pull out from the appliance.
8. DESCALING
„ „
Your coffee maker has a descaling indicator [
display automatically after 60 cycles.
You can use:
„ „
Regular household white vinegar
„ „
Pour into the tank (C).
„ „
Allow the liquid to stand for 30 minutes.
„ „
Restart the coffee maker and let the rest of the liquid pass through to the coffee maker.
„ „
To rinse, run the coffee maker 2 or 3 more times with full tank of water.
To optimize your coffee maker's performance, the word "Clean" is set to flash on the
display after 60 brew cycles. To reset this reminder, press the Hour and Min buttons at
the same time.
The guarantee does not cover coffee makers that malfunction or cease to operate
because they have not been regularly descaled.
6
] which lights up on the digital
CLEAN
TIPS & ADVICE
To optimize your coffee maker's performance, the word "Clean" is set to flash on
the display after 60 brew cycles. To reset this reminder, press the Hour and Min
buttons at the same time.

9. TROUBLESHOOTING

PROBLEM
The coffee does not brew or the machine
does not switch on.
Appliance appears to be leaking.
It takes a long time to brew.
SOLUTION
„ „
Check to ensure the appliance is
plugged into a working outlet, and the
appliance is in the "ON" position.
„ „
The water tank is empty.
„ „
There was a power failure.
„ „
There was a power surge. Unplug the
machine, then plug it back in.
„ „
The clock must be reset after a power
failure.
„ „
The Auto-Off function switches off the
coffee maker. Switch off the coffee
maker then switch it back on to make
more coffee. For more information,
refer to the section "Making Coffee".
„ „
Make sure that the water tank has not
been filled beyond the max fill level.
„ „
It may be time to descale your coffee
maker.
„ „
Numerous minerals may accumulate
in the coffee maker's circuit.
Periodic descaling of the machine
is recommended. More frequent
descaling may be necessary depending
on the hardness of the water. For more
information, refer to the "Descaling"
section.
NOTE: do not dismantle the machine.
7