Mopar XBM Manual Del Usuario página 20

20
70. Connect the squib connectors to the passenger side
airbag.
71. Install the passenger side airbag fasteners to the I/P
reinforcement bracket. Tighten the fasteners to 6 N∙m
(55 in. lbs.).
72. Install the three top pad to structure fasteners (3) lo­
cated in the upper glove box cavity area. Tighten the
fasteners securely.
73. Position the upper glove box door (1) to the instrument
panel.
74. Install the fasteners (1, 2) to the upper glove box door
(1). Tighten the fasteners securely.
75. If equipped, install the USB connector to the upper
glove box and position the glove box (1) into the cav­
ity. Make sure all the retaining clips are engaged.
76. Install the fasteners (2, 3, 4, 5, 6) securing the upper
glove box (1). Tighten the fasteners securely.
77. Install the trim bezel (2) to the instrument panel.
78. Install the fasteners (1) to the instrument panel trim
bezel (2). Tighten the fasteners securely.
79. Close the upper glove box door.
Jul 01, 2011
4280416
K6861201