4
IF VEHICLE IS NOT EQUIPPED WITH HOOD SWITCH
HARNESS TAKE OFF
10. Remove the vehicle ground bolt (1) located next to the
battery.
11. Install the hood switch ground harness ground termi
nal and install the vehicle ground bolt (1) back into the
inner fender.
12. Remove the TIPM cover.
13. Remove the positive battery feed (2) from the TIPM.
14. Using a flat blade screwdriver, release the TIPM re
taining tabs (1) and lift up to access the TIPM harness
connectors located underneath.
15. Disconnect the connector (1) labeled D.
Jul 01, 2011
4280416
K6861201