Add Fence Fabric; Stretch The Fabric - Petsafe 2-in-1 Dog Kennel Instrucciones De Montaje

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Step

Add Fence Fabric

6
1. Gather 5 Clips, 1 Tension Rod, package of Tie Wires, and the roll of Chain Link Fabric. Note: Putting on
the fabric is easy, except chain link fabric is strong and stiff and the roll is heavy, so a helper is recommended.
2. Start at a post next to the gate. Slip the tension rod down through the fi rst diamonds of the fabric (6B).
3. Connect the fabric to the gatepost by clipping the tension rod to the post (6C). Secure all 5 clips.
4. Unroll the fabric around the kennel. Loosely add a tie wire to the top frame about every 5 feet to keep
the fabric from falling down (6A).
6A
__________________________________________________________________________________________________

Stretch the Fabric

Step
1. Starting from the fi rst post away from the gate, use a hammer to stretch
the fabric as shown.
7
2. Stretch fabric as tightly as possible. Add tie wires to posts to hold the
stretched fabric.
Important: Be sure all tie wires are on the same picket (wire) or
the fabric will be crooked.
3. Stretch and tie to the next post, until you go all the way around. Don't tie
the last post (at the gate).
www.petsafe.net
6B
6C
7

Publicidad

Tabla de contenido
loading

Tabla de contenido