Armrests; Armrest Adjustment; Headrest - Grammer MSG87 Manual De Instrucciones

Seat functions and operation
- - +
+
26

Armrests

The armrests can be folded up if required and
the height can be individually adjusted.
To adjust the armrest for height, separate the
round cap (see arrow) from the cover and
loosen the hexagon nut (size 13mm) behind
it. Adjust the armrests to the desired position
(5 steps) and tighten the nut again (25Nm).
Replace the cap onto the nut.

Armrest adjustment

The inclination of the armrest can be modified
by turning the adjustment knob.
When turning the knob to the outside (+), the
front part of the armrest will be lifted; when
turning the knob to the inside (-), it will be
lowered.

Headrest

The headrest can be individually adjusted for
height by pulling it upward over the various
increments up the end stop.
By pushing forwards or rearwards the angle of
the headrest can be adjusted individually.
To remove the headrest, pull it over the end
stop.
GB