sion cord suitable for outdoor use. Use of a cord suitable for
outdoor use reduces
the risk of electric shock.
f)
If operating a power tool in a damp location is unavoida-
ble, use a residual current device (RCD) protected supply. Use
of an RCD reduces the risk of electric shock.
•
3) Personal safety
a)
Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power tool
while you are tired or under the influence of drugs, alcohol or
medication. A moment of inattention while operating power
tools may result in serious personal injury.
b)
Use personal protective equipment. Always wear eye
protection. Protective equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
c)
Prevent unintentional starting. Ensure the switch is in
the off- position before connecting to battery, picking up or
carrying the tool. Carrying power tools with your finger on
the switch or energising power tools that have the switch on
invites accidents.
d)
Remove any adjusting key or wrench before turning the
power tool on. A wrench or a key left attached to a rotating
part of the power tool may result in personal injury.
e)
Do not overreach. Keep proper footing and balance at all
times. This enables better control of the power tool in unex-
pected situations.
f)
Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving parts.
Loose clothes, jewellery or long hair can be caught in moving
parts.
g)
If devices are provided for the connection of dust extrac-
tion and collection facilities, ensure these are connected and
properly used. Use of dust collection can reduce dust-related
hazards.
•
4) Power tool use and care
a)
Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the job
better and safer at the rate for which it was designed.
b)
Do not use the power tool if the switch does not turn it
on and off. Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
c)
Disconnect plug from the power source and/or the bat-
tery pack from the power tool before making any adjustments,
changing
accessories, or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool acciden-
tally.
d)
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are dan-
gerous in the hands of untrained users.
e)
Maintain power tools. Check for misalignment or binding
of moving parts, breakage of parts and any other condition
that may affect the power tool's operation. If damaged, have
the power tool repaired before use. Many accidents are cau-
sed by poorly maintained power tools.
f)
Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to bind
and are easier to control.
g)
Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into account the
working conditions and the work to be performed. Use of the
power tool for operations different from those intended could
result in a hazardous situation.
•
5) Battery tool use and care
a)
Recharge only with the charger specified by the manu-
facturer. A charger that is suitable for one type of battery pack
may create a risk of fire when used with another battery pack.
b)
Use power tools only with specifically designated battery
packs. Use of any other battery packs may create a risk of
injury and fire.
c)
When battery pack is not in use, keep it away from other
metal objects, like paper clips, coins, keys, nails, screws or
other small metal objects, that can make a connection from
one terminal to another. Shorting the battery terminals toge-
ther may cause burns or a fire.
d)
Under abusive conditions, liquid may be ejected from the
battery; avoid contact. If contact accidentally occurs, flush
with water. If liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause irritation or
burns.
•
6) Service
a)
Have your power tool serviced by a qualified repair per-
son using only identical replacement parts. This will ensure
that the safety of the power tool is maintained.
Safety instructions for nailers – nailer safety
warnings
•
Always assume that the tool contains fasteners. Careless
handling of the nailer can result in unexpected firing of
fasteners and personal injury.
•
Do not point the tool towards yourself or anyone nearby.
Unexpected triggering will discharge the fastener causing
an injury.
•
Do not actuate the tool unless the tool is placed firmly
against the workplace. If the tool is not in contact with
the workplace, the fastener may be deflected away from
your target.
•
Disconnect the tool from the battery when the fastener
jams in the tool. While removing a jammed fastener, the
nailer may be accidentally activated if it is plugged in.
•
Use caution while removing a jammed fastener. The
mechanism may be under compression and the fastener
may be forcefully discharged while attempting to free a
jammed condition.
•
Do not use this nailer for fastening electrical cables. It
is not designed for electric cable installation and may
damage the insulation of electric cables thereby causing
electric shock or fire hazards.
•
The tool should not be modified unless authorized in the
tool manual or approved in writing by the tool manu-
facturer. The tool may function unexpectedly after the
modification and cause dangerous.
•
Do not drive this tool over materials that is too hard or
too soft. Hard material can ricochet fastener and hurt
people, soft material may be penetrate easily and cause
the fastener to free fly.
•
Please use only lubrication liquid specified in this manual
to perform the lubrication. Use other lubrication may cau-
se damage to the tool and the risk of malfunction that will
injure the operator.
Remarks: 4 FL.OZ.(118ml)
English
19