Preparations - Fastbind SECURA Manual De Instrucciones

5. PREPARATIONS

To prepare your machine for use:
1. Remove the packing and protective material.
2. Check the delivery for any damage incurred during transportation.
3. Confi rm that the shipment corresponds with the details in the delivery note.
Each standard package contains:
•
One Fastbind Secura binding machine equipped with
•
one soft cover paperguide and
•
one soft cover nipping plate (marked with "S")
•
One power cable
•
This User's Manual
4. Select a good location for your machine
•
Position the machine on a steady horizontal surface close to a power outlet
•
When selecting the location, remember that the machine weights 30 kg (66 lb)
•
For your own convenience, make sure that there is enough space around the
machine for papers, covers and other necessary supplies.
5. Rotate the turntable to down (DN) position (see the printed scale next to a hand lever). Open
the clamp by pulling the clamp handle and remove the power cord and possible test books.
6. Remove the reservoir cap and check the glue level in the adhesive applicator. Hot-melt
adhesive should always cover the holed minimum level plate. If not, add more hot-melt to
the applicator. Take care not to overfi ll the adhesive reservoir. Do not re-use hot melt drops
from the drop collector tray. Pieces of paper and impurities in the used glue will damage the
applicator.
Note that the applicator can be moved only when the machine has warmed up. At the room
temperature hot melt in the reservoir is still solid and thus blocks the roller rotation.
7. Connecting the power cord
•
Once you have checked that local power supply matches with the machine's
operating voltage, connect the mains lead to the machine fi rst before inserting the
mains plug to the earthed power outlet.
•
Press the main switch to turn the machine on. The power indicator should light up
green.
8. Let the machine warm up for 20 minutes. During this time glue in the applicator's reservoir
melts, and the applicator will run easily along the guide rail. Now it is ready to use.
Note that even the best hot melts degrade during the time in high temperatures. To preserve
adhesive's chemical properties and minimize energy consumption, turn the machine off when
not working with it.
1 - 4