Medela pump in style advanced Instrucciones página 8

Bomba de lactancia
Ocultar thumbs Ver también para pump in style advanced:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

10. Center the assembled breastshields over
your nipples.
IMPORTANT:
Do not tilt or overfill containers when pumping.
IMPORTANT:
Take care not to kink tubing(s) while pumping.
11. To begin pumping, turn the dial
clockwise from the off position.
Pump In Style
Advanced
®
will start in the stimulation phase.
Adjust the speed/vacuum to your
comfort level while pumping by turning
the dial to a cycling speed most
comfortable to you.
12. After two minutes, the stimulation
phase will automatically change to the
expression phase. If you let-down (your
milk starts to flow) sooner than
two minutes, you may pump more
efficiently by pressing the let-down
button at that time.
12
13. Once in the expression phase, set your
Maximum Comfort Vacuum
. Maximum
Comfort Vacuum is the highest vacuum
you can use and still feel comfortable.
To find your Maximum Comfort
Vacuum: increase speed/vacuum until
pumping feels slightly uncomfortable
(never painful), then decrease slightly.
14. If you need to return to the stimulation
phase for any reason, simply press
the let-down
button. You may
return back to the expression phase
quickly by pressing the let-down
button again.
*Research has shown that you will pump
more efficiently - get more milk in less
time - when pumping at Maximum Comfort
Vacuum in the expression phase.
Tip: Once you are finished pumping; unplug the tubing from the back
of the breastshield prior to setting down the bottles. Allow the pump
to continue to run while you safeguard your breastmilk. This will allow
any condensation that may have formed in the tubing to dry.
Tip: Some moms prefer going back and forth between stimulation
and expression to achieve second let-downs throughout a pumping
session. You can do this by pressing the let-down
any time.
button at
13

Publicidad

Tabla de contenido
loading

Tabla de contenido