Kit Assembly; Din Radio Provision With Pocket - Metra 99-5721 Instrucciones De Instalación

DIN radio provision with pocket

1. Remove the metal "DIN" sleeve
from the aftermarket radio.
2. Slide the DIN cage into the
Radio Housing and secure by
bending the metal locking tabs
down. (Figure A)
3. Snap the pocket into the lower
opening of the radio/housing
climate panel until it clicks in.
(Figure B)
4. Slide the radio back into the
sleeve until it clicks in. (Figure
C)
5. Connect the climate extension
harness to the climate control
harness removed in step 12 of
disassembly, and then into the
radio/climate housing panel.

Kit Assembly

6. Locate the factory wiring
harness and antenna plug in the
dash. Metra recommends using
the proper mating adapters
from Metra and/or AXXESS.
7. Reassemble the dash in reverse
order of disassembly, using the
99-5721 radio/climate housing
panel instead of the factory
radio/climate panel.
(Figure A)
®
99-5721
(Figure B)
(Figure C)
4