Harbor Breeze E-YLM52WW5C1 Manual Del Usuario página 7

INITIAL INSTALLATION
Secure mounting bracket (C) to outlet box (not
4.
included) using screws, spring washers and flat
washers provided with the outlet box.
*NOTE: It is very important you use the proper
hardware when installing the mounting bracket
(C) as this will support the fan.
IMPORTANT: If using the angle mount, make
sure open end of mounting bracket (C) is installed
facing the higher point of the ceiling, and ensure
the ceiling angle is not steeper than 19°.
5. Remove preassembled motor screws (J) and
motor washers (R) from underside of motor
housing (D).
Note: Make sure to keep loose hardware
separate to avoid confusion during installation.
6. Remove pin (L) and clip (M) from downrod (A).
Partially loosen preassembled set screws and nuts
in yoke at top of motor housing (D).
STANDARD MOUNT
4
C
5
6A
M
A
Yoke
D
Lowes.com/harborbreeze
7
ANGLE MOUNT
C
Open End
J
R
D
6B
L
Set Screw