PREPARE THE HOOD
Note: On stainless steel hoods, carefully
remove the plastic protective film from all
exterior surfaces of the hood and
decorative flues, prior to final installation.
DUCTED HOODS ONLY
1. Remove the tape on the electrical system
plate. Mount the electrical system plate
attaching it with 3 mounting screws
(3.9x9.5mm) and 2 star washers (Fig. 8).
2. Install the discharge collar into the duct
connector of the range hood (Fig. 9).
(2) STAR WASHERS
- 11 -
(3) 3.9 x 9.5
mm
MOUNTING
SCREWS
ELECTRICAL
SYSTEM
PLATE
FIG. 8
DISCHARGE
COLLAR
DUCT
CONNECTOR
FIG. 9