Install The Hood - Best WC23I Manual Del Usuario

INSTALL THE HOOD

DUCTED AND NON-DUCTED HOODS
Note: at least two people will be required to mount the hood.
1. Raise the hood into its mounting position.
2. Align the rectangular opening on the back of the hood with the wall-mounting
bracket. Gently lower the hood until it securely engages the bracket. Fig. 13.
3. Secure the hood with (4) 4.8x38mm mounting screws. Use drywall anchors
provided if wall studs or framing are not available. Fig. 13.
4. On ducted hoods, attach 6" round metal duct between the hood's blower collar
and duct that leads to the outside location.
5. On non-ducted hoods, attach 5" round metal expandable duct between the 5"-6"
adapter on the hood the connector on the plenum.
6. Tape all duct joints to make them secure and air tight.
7. Plug the power cord into the electric wall receptacle. Tuck excess cord behind
the flue.
MOUNTING SCREWS
(4.8x38mm)
WALL FRAMING
- 13 -
MOUNTING
BRACKET
RECTANGULAR
CUTOUT
FIG. 13