Placing In Operation - Monti MBX Bristle Blaster 3500X Manual De Instrucciones

Operating instructions
GB
7.

Placing in operation

Application:
This tool is used for the removal of corrosion and coatings, and for producing a rough surface profile (anchor profile)
using a specially developed Bristle Blaster
1.
Use suitable sealing material such as Teflon
connection for the pneumatic hose.
2. On the selection of the
account the surface to be machined (angle, 11mm belt/ flat
surfaces, 23 mm belt).
3.
Interrupt supply of compressed air and then fasten
®
Bristle Blaster 23 mm or 11 mm belt correctly to the tool using
the related adapter system (pay attention to direction of travel)
and the related serrated lock washer and screw. See Fig. 1 and
Fig. 2
®
4. Never place an MBX
23 mm adapter system, and never place a MBX
®
23 mm belt in a MBX
er
®
5. For MBX Bristle Blaster
accelerator bar. For MBX
®
MBX 40 mm accelerator bar. For MBX
®
belt only use MBX 24 mm accelerator bar. For MBX
®
Blaster 23 mm belt only use MBX
6. Start tool by pressing starter lever. Move the safety stop forward
and press the starter lever. The starter lever returns to its initial
position when released.
7.
Hold tool by the tool body and the vertical handle at the same
time.
8. To obtain the best performance, it is to be ensured the accel-
erator bar is guided close to the surface to be machined. If the
accelerator bar is too far from the surface, the performance will
drop significantly. See Fig. 3. For a more detailed description of
the function of the MBX
or www.monti.de.
9. Work only with minimum surface pressure. Excessive surface pressure reduces effectiveness.
10. In all circumstances, prevent the entry of water (moist air) into the pneumatic tool.
18
All manuals and user guides at all-guides.com
®
belt.
®
Band to fasten the
® ®
MBX Bristle Blaster belts, take into
®
Bristle Blaster 11 mm belt in an MBX
®
®
11 mm adapter system.
®
11 mm belt only use MBX
® ®
Bristle Blaster 23 mm belt only use
®
Bristle Blaster
®
40 mm accelerator bar.
® ®
Bristle Blaster see the DVD supplied
®
MBX
®
Bristle Blast-
®
24 mm
®
11 mm
®
Bristle
® ®
MBX
Bristle Blaster 3500X
Fig. 1
Fig. 2
Fig. 3