Monti MBX Bristle Blaster 3500X Manual De Instrucciones página 21

® ®
MBX
Bristle Blaster 3500X
Correct
direction of operation
If the tool does not work correctly, check the following:
Are you using a suitable
Æ
Are you operating the tool with the correct speed? – Problems with the tool, see section 10, Troubleshooting.
Æ
MBX
Are you using an
Æ
direction (see section 7, Placing in operation, Fig. 2).
®
Is the MBX accelerator bar showing signs of wear? Check MBX
Æ
approx. 45° or exchange.
All manuals and user guides at all-guides.com
Less pressure = longer service life and
higher performance
Holding machine
®
MBX belt for the surface to be machined? – Use the most suitable MBX
®
belt with the wrong direction of travel? – Fit the brush belt such that is runs in the correct
Operating instructions
Observe the correct working position!
Angle machining
®
accelerator bar. In case of wear turn by
GB
®
belt.
19