Service Instructions; Troubleshooting - Monti MBX Bristle Blaster 3500X Manual De Instrucciones

® ®
MBX
Bristle Blaster 3500X
9.

Service instructions

1. The tool is to be serviced exclusively by qualified staff members or by the dealer who has sold it. Repair or servic-
ing by unqualified personnel may result in injuries and/or damage to the tool.
2.
Only original spare parts are to be used for the servicing of the tool. If parts that are not approved are used or
maintenance instructions are not followed, the warranty will be rendered void and there may be a risk of injury.
10.

Troubleshooting

Fault Cause
Belt does turn or Compressor is not operating
turns slowly
Filter or compressed air hose blocked
Insufficient compressor pressure
Inadequate compressor performance
Compressed air hose too long
Diameter of compressed air hose too small
Compressed air motor insufficiently
lubricated
Valve or valve sealing ring faulty
Unusal sound Mechanical parts insufficiently lubricated
Belt or other machine parts faulty
Water entering the machine via the
compressed air supply
Heavy vibration of Adapter system is not fastened correctly
the rotating belt
Foreign body jammed between spindle and
adapter system
Adapter system worn
Belt faulty
Adapter system Screw not tightened or serrated lock washer
comes undone in not used
operation
Screw / serrated lock washer worn
All manuals and user guides at all-guides.com
Operating instructions
Solution
Switch on or check compressor
Clean compressed air line
Increase compressor pressure
Use more powerful compressor
Use compressed air hose of suitable length
Use compressed air hose of suitable size
Add a few drops of oil to the compressed air
connection
Servicing by qualified engineer
Servicing by qualified engineer
Fit new belt / servicing by qualified engineer
Servicing by qualified engineer
Re-fit adapter system
Remove object and re-fit
Use new adapter system
Fit new belt
Use serrated lock washer and tighten screw
Use new screw / serrated lock washer
GB
21