bloom nano 10502 Guia Del Usuario página 10

eng
– To remove the upholstery & safety harness
for cleaning, follow the instructions given in
the care & maintenance section of this user
guide.
5 - ) Safety Bar Assembly
– Insert safety bar into the plastic round joints
on either side of the highchair frame (you
will see engraved A & B) by fitting the end
of safety bar with a nub into joint A, and the
other end with no nub into joint B. You will
hear audible clicks. Pull to ensure secure.
– Slot part of the crotch bar clamp through slit
on seat pad to position it onto the upholstery
and metal tubing.
– Secure the crotch bar by closing the clamp
over the upholstery and metal tubing. You
will hear an audible click. Pull to ensure it is
secure.
– The USA safety bar design is slighty different
due to USA specific standard requirements.
Assembly is performed in the same manner
as above. Warning: Do not disassemble the
USA crotch bar.
Safety Bar Removal
– Unlock the crotch bar by opening the clamp
on the end.
– Use a pen to press the small pin in the round
joints on either side of the frame, pull and
remove safety bar.
 Using and adjusting the safety harness
Locking the safety harness:
(safety harness #04) lock the harness by pushing
10
the tongues on the ends of the waist straps,
connected with the ends of the shoulder straps,
into the buckle on the crotch strap.
The harness will lock when the tongues are fully
pushed in. You will hear audible clicks.
Unlocking the safety harness:
Squeeze the ends of the tongues together and
slide them out of the buckle. Your child can now
be removed from the highchair.
Adjusting the harness
All five harness straps are length adjustable. As
your child grows you will need to alter the height
of the shoulder straps. The time to do this is
when the child's shoulders are above the slits on
the upholstery, where the shoulder straps pass
through.
 - 12) Food Tray Assembly
– Open the two latches under food tray by
sliding button whilst rotate latch outwards.
– 11- (1) Pull the two side triggers under the tray
to retract the locking pins, whilst place the
food tray on the safety bar.
– 11- (2) Release the side triggers to fit the
locking pins into desired position, you will
hear audible clicks. To ensure the pins are in
place, slide the tray along the safety bar.
– 11- (3) Close the latches to secure tray. You will
hear audible clicks.
– To adjust tray position, pull the side triggers
under the tray whilst sliding the tray forwards
or backwards. Release triggers at the desired
setting. You will hear audible clicks. Pull to