Product Information - bloom nano 10502 Guia Del Usuario

Product Information

This highchair has been designed and tested to
ensure compliance with the latest relevant safety
standards.
• Designed for children aged between 6
months and 3 years
• Space-saving flat-fold mechanism
• 'Up-to-the-table' and traditional (tray) feeding
modes
• Super sized adjustable tray (3 positions) with
deep lip to prevent spills – removable and
dishwasher safe
• 5-point safety harness with height adjustable
shoulder straps
• Leatherette seat upholstery for comfort and
easy clean in contemporary colours
• 2-position adjustable footrest
• Iconic and minimalist design
Model No.: 10502
Patents Pending
Colour & contents may vary
NOTE: Adult assembly required.
Instructions For Safe Use - Please read
carefully and keep for future reference
The correct use and maintenance of your
highchair will ensure it gives long and trouble-
free use. When somebody else is using your
highchair please ensure they also know how to
use it, how to adjust it and the necessary safety
precautions.
Basic Assembly (refer to Section a of
Illustrations)
1 - 3 Frame Assembly
– (base #02) Unfold the base frame by pulling
front and rear legs apart. Press down on seat
base until you hear audible click to ensure
frame is fully open and secure.
– Do not remove the protective foam on the
backrest tube, this is part of the product.
– Insert backrest tube into the plastic round
joints on either side of the highchair frame
(see engraved A & B), by fitting the end of
backrest tube with a nub into joint A, and the
other end with no nub into joint B. You will
hear audible clicks. Pull to ensure it is secure.
4 Upholstery Assembly
– Wrap backrest part of upholstery over the
backrest tube. From behind the highchair,
close zipper to secure.
– Wrap the side flap on both sides of upholstery
over the front leg tubing and secure onto
velcro.
eng