Monti POWER MBX AXIAL Manual De Instrucciones página 10

EN Operating instructions
10. Technical data
10.1 Technical data: MBX
Specifications
Air consumption
Compressed air connection
Required hose diameter
Weight
Idling speed (unloaded),
at 75 psi (5.2 bar) flow pressure
Speed with Belt, 11 mm
Sound pressure level (L
Vibration (motor a
10.2 Technical data: Pressure regulator
Specifications
Compressed air connection
Weight
11. Lubrication/Maintenance
If the tool is new, ensure that the compressed air motor is lubricated before use. If a lu-
bricator connected in series is not used, add a few drops of light oil to the compressed
air connection daily. Proper lubrication will ensure a longer tool service life.
12. Service information
1. All maintenance work on the tool must be carried out exclusively by trained and qua
lified technical personnel or by the dealer from whom you purchased the tool. Repair
or maintenance by unqualified personnel could result in injury and/or damage to the
tool.
2. Use only original spare parts when servicing this tool. The use of unauthorized parts or
failure to comply with the maintenance instructions will void the warranty and pose a
risk of personal injury.
10
®
Axial
)
PA
) with 11 mm Belt
hw
Value Unit
400 liters/min. | 14.2 CFM
R 1/4"
3/8" ID (9,5 mm)
1,1 kg
2600 ± 5 %
2100 ± 5 %
84 dB(A) Wear hearing protection!
1,45 m/s²
Value Unit
G 1/4"
90 g
®
MBX AXIAL