Troubleshooting - Monti POWER MBX AXIAL Manual De Instrucciones

®
MBX AXIAL

13. Troubleshooting

Error
Belt not rotating
or rotating slowly
Unusual sound
Rotating Belt
vibrating strongly
Adaptor system
loosening during
operation
Cause
Compressor not working
Filter or compressed air hose
clogged
Insufficient compressor
pressure
Insufficient compressor power
Compressed air hose too long
Compressed air hose diameter
too small
Compressed air motor not
sufficiently lubricated
Valve or valve sealing ring
defective
Mechanical parts not
sufficiently lubricated
Belt or other machine parts
defective
Water entering the machine
through the compressed air
supply
Adaptor system is not properly
fastened
Foreign object jammed
between spindle and adaptor
system
Adaptor system worn out
Belt defective
Screws not tightened or no
serrated washer used
Screw / serrated washer worn
out
Operating instructions
Solution
Switch on or check compressor
Clean compressed air line
Increase compressor pressure
Use stronger compressor
Use compressed air hose of
suitable length
Use compressed air hose of
suitable size
Add a few drops of oil to
compressed air connection
Service by qualified technician
Service by qualified technician
Insert new Belt / service by qualified
technician
Service by qualified technician
Refit the adaptor system
Remove object and remount
Use new adaptor system
Insert new Belt
Use serrated washer and tighten
screw
Use new screw / serrated washer
EN
11